Case Study
Eastern Panhandle Retreat
A residential multi-finish package in Martinsburg pairing a Venetian plaster fireplace surround, breathable limewash across the adjacent sitting-room walls, and a hand-painted geometric accent on the entry console
For Specifying Trade Partners
A Multi-Finish Signature Install
Eastern Panhandle Retreat brings three boutique finishes into a smaller-scope residential package — a Venetian plaster fireplace surround as the primary anchor, a breathable limewash across the adjacent sitting-room walls, and a hand-painted geometric accent treatment on the entry console. The Martinsburg home carries modern farmhouse bones but with a tighter scope than our larger Charles Town and Shepherdstown installs: fewer square feet, fewer finishes, and a tighter schedule. The install still asks each finish to do its job in the same lighting, against the same substrate, and on the same calendar — so substrate prep, cure windows, and trade sequencing mattered as much here as on the multi-finish whole-home packages. The walkthrough below documents each finish as we applied it (substrate prep, layering, sequencing, and finishing notes) so the trade team has a tangible reference for what a smaller-scope Eastern Panhandle residential install looks like in practice.
Finish 01 of 03
Venetian Plaster
The fireplace surround is the primary anchor of the install — a soft Venetian plaster in a warm, muted ink tone, applied in four thin layers and burnished to a low-luster sheen that catches the recessed cove lighting without competing with the limestone hearth. We selected this finish as the head of the package because its tonal depth absorbs the adjacent limewash transition without flattening the room, and because a troweled plaster surround reads as bespoke against a stock mantel in a way that a paint-grade finish cannot.
Process Notes
- Substrate: the existing masonry surround was leveled to a skim-coat finish, sealed with a plaster-compatible primer, and tested under 12 percent moisture before trowel work began.
- Base coat applied by stainless steel trowel — full coverage, no telegraphing of the masonry seams.
- Two subsequent coats in the same tinted mineral plaster, troweled in crossing directions to set the tonal variation.
- Final burnish pass with a fine-edge trowel at partial cure, generating the low-luster sheen without waxing the surface.
- Cure window: 48 hours before the limewash adjacent walls were brushed within the same elevation.
Finish 02 of 03
Limewash
The adjacent sitting-room walls were specified in a mineral limewash in a chalky bone tone. We chose limewash here because the home's existing plaster partition needed a finish that would keep breathing — a sealing finish would have trapped residual substrate moisture and risked hairline cracking at the seams nearest the plaster surround. The depth of the limewash softens the visual transition between the plaster fireplace elevation and the geometric accent treatment on the entry console.
Process Notes
- Substrate: existing plaster partition, tested for breathability; any prior acrylic primer residue was removed before brushwork began.
- Brushwork applied in long, loose strokes with a specialty limewash brush — no roller, no spray.
- Three coats minimum, with each coat burnished into the previous before full dry for tonal saturation.
- Edges feathered into the Venetian plaster reveal at the surround with a 1/8-inch clean gap, kept tight with low-tack tape and a steady hand.
- Sealed with the studio's signature matte wax for scrub resistance without losing the mineral matte read.
Finish 03 of 03
Geometric Accents
The entry sequence closes with a hand-painted geometric accent treatment on the console wall — a custom interlocking pattern in soft brass and warm gray, layered over a tinted Venetian plaster base. The geometry was developed in collaboration with the design firm during the specification phase and refined through two rounds of sample boards before we set the final dimensions on the wall. It is the smallest surface in the package but carries the most linework per square foot, so the sequencing here had to wait cleanly on the limewash cure downstream.
Process Notes
- Base wall: tinted Venetian plaster applied to the same Level 5 standard as the fireplace surround.
- Pattern transferred to the wall using a snap-line reference grid, surveyed and verified before any line work began.
- Brass and warm-gray accents hand-painted in two thin coats with a fine detail brush — no tape used on the final pass.
- Gold leaf accents applied selectively at the line intersections for controlled luminosity, sealed with a non-yellowing topcoat.
- Final inspection walk with the design firm before cure — every line verified against the original specification drawing.
Project Gallery
From the Install
Specifying a smaller-scope multi-finish package for an Eastern Panhandle residential?
Open Trade Program Or book a private consultation →